Specifications

• Inverter Output: 5,000W (5kW), 8,000W (8kW) continuous; max surge 7,500W (5kW), 12,000W (8kW)
• Pure Sine Wave Output: 220/230V single-phase, 50/60Hz
• Battery Type: Li-ion (LiFePO₄), 51.2V, each module 5.12kWh, stackable 5–40kWh Expand up to 8 batteries
• Max. PV Input Power: 7,500W (5kW), 12,000W (8kW)
• Max. PV Voltage: 550V
• MPPT Voltage Range: 80–500V; 2 MPPT trackers
• Max. Input Current per PV String: 14A
• Max. AC Output Current: 21.7A (5kW), 38.3A (8kW)
• Battery Charge/Discharge Current: Up to 100A (5kW), 160A (8kW)
• Switch Time (EPS/UPS): <20ms
• Efficiency: Max 97.6%; Euro 97%; battery round-trip 95%
• Protection Features: Overload, over/under voltage, overheat, short circuit, anti-reverse, surge, fire suppression
• Operating Temperature: 0–50°C (charging), -15–50°C (discharging); humidity 0–95% non-condensing
• Noise: <35dB
• Enclosure Protection: IP65 (indoor/outdoor)
• Cooling: Natural convection
• Communication: RS485; Wi-Fi optional
• Certifications: Australian Made®, CE, FCCE, ROHS, IEC62109-1/2, EN61000, grid-tie standards

Specifications

• Inverter Output: 3.6kW, 5kW, 6.2kW, 12kW pure sine wave (single phase)
• Surge Output: Up to 2× rated power, 10 seconds
• PV Input Power: Up to 4,680W (3.6kW), higher for larger models
• PV MPPT Voltage Range: 100–500V; operating: 125–425V
• Max. PV Input Current: 13–18A (per MPPT tracker, multiple trackers per model)
• Max. AC Charging/Discharging Current: 100A
• AC Output Voltage: 220/230/240V (single phase), 50/60Hz
• UPS Transfer Time: ≤10ms
• Protection Features: Over/under voltage, overload, surge, short circuit, anti-islanding, fire suppression
• Communication: RS485, CAN, remote app/OTA upgrade
• Cooling & Noise: Smart cooling; <30dB
• Install Style: Wall-mounted (inverter); floor/rack/wall/stack (battery)

Battery Specs

• Battery Type: Lithium Iron Phosphate (LiFePO₄)
• Capacity: 5.12kWh, 10.24kWh, 15kWh per module
• Usable Energy: ~90% of nominal (e.g., 4.6kWh for 5kWh module)
• Rated Voltage: 51.2V (range: 44.8–57.6V)
• Max. Charge/Discharge Rate: 100A–200A (model dependent)
• Cycle Life: ≥6,000 cycles to 80% retention at 25°C
• Scalability: Up to 10 modules in parallel (expand to 51.2kWh)
• Mounting: Floor, wall, rack or stackable
• Certifications: Australian Made®, CE, ROHS, FC, IEC62109, TUV, UN38.3

Specifications

• Battery Type: Lithium Iron Phosphate (LiFePO₄), 6,000+ cycles (to 80% capacity)
• Battery Capacity: 100kWh (expandable on request), 51.2V architecture, modular packs
• AC Output: 10,000W continuous, pure sine wave, three phase, 380/400/415V, 50/60Hz
• PV Input: Customizable; typically integrates MPPT controllers for large multi-string solar arrays
• BMS: Smart battery management for safe long-term operation
• Inverter Features: Integrated, high-efficiency, rapid transfer (<20ms for switchover)
• Operating Temp: 0–50°C (charge), -15–55°C (discharge)
• Enclosure: IP54+ industrial container; fire-suppression, dust- and moisture-resistant
• Communication: RS485/CAN, Wi-Fi/Ethernet remote panel (optional)
• Certifications: Australian Made®, CE, ROHS, FC, UN38.3, TUV, IEC
• Protection Features: Overload, short-circuit, under/over voltage, temperature, surge, anti-islanding

Specifications

• Model Options: 5KT, 8KT, 10KT, 12KT
• PV Input: Up to 18A/string (max), 1000V DC, 2~4 strings (model dependent)
• Max PV Power: 7,500W (5KT), 12,000W (8KT), 15,000W (10KT), 18,000W (12KT)
• Battery Type: Li-Ion/LiFePO₄ or Pb-Acid, 150–750V, 15–25A charge/discharge
• AC Output (Backup/Grid): 5,000–12,000VA (cont.), 1.5× surge (10s), 3/N/PE, 230/400V, 50/60Hz
• UPS Switching: <10ms
• Efficiency: Up to 98.2% (max), Euro efficiency up to 97.4%
• Protection: Overcurrent, over/under voltage, surge, short-circuit, isolated battery/grid
• Enclosure: IP65, intelligent cooling
• Communication: CAN, RS485, optional Wi-Fi